Search filter
104 results found
… 63 Motor … ABS 0.92 Acetal 0.26 Neodymium 0.0000159 Unit % % % % % % % % Steel is produced by combining iron with carbon as well as other elements depending on the desired characteristics. Components made of steel are formed by stamping or other types of mechanical processing. Stainless steel is produced by combining iron with chromium as well as other elements depending on the desired characteristics. Components made of steel are formed by stamping or other types of mechanical processing. Zamak is an alloy with a base metal of zinc and alloying elements of aluminium, magnesium, and copper. Components made of Zamak are die-cast. Motor, PCB are electronic components, which include copper wiring, etched copper sheets on non-conductive substrates, resistors, transistors, etc. ABS (acrylonitrile butadiene styrene) is a terpolymer polymer made by polymerizing styrene and acrylonitrile in the presence of polybutadiene. Components made of ABS are made by injection moulding or other thermal forming processes. Acetal, or polyoxymethylene (POM), is produced by polymerisation of anhydrous formaldehyde. Components made of Acetal are formed by injection moulding or other thermal … .2023) exceeding 0.1 percentage by mass: Certain components may contain small amounts of lead (CAS no. 7439-92-1) as an alloying element. 2) This product/article/at least one partial article contains other cancerogenic, mutagenic, reprotoxic (CMR) substances in categories 1A or 1B which are not on the ECHA candidate list, exceeding 0.1 percentage by mass: no. 3) Biocide products were added to this construction product or it has been treated with biocide products (this then concerns a treated product as defined by the (EU) Ordinance on Biocide Products No. 528/2012): no. … 0.63 - … kg of biogenic carbon is equivalent to 44/12 kg of CO2. Name Value Unit kg 0 C kg 0.0678 C Biogenic carbon content in product Biogenic carbon content in accompanying packaging The following information is the basis of the declared modules within the LCA in this EPD. Transport to the building site (A4) Name Litres of fuel Transport distance Capacity utilisation (including empty runs) Installation into the building (A5) Name Material loss Value Unit … l/100km 3500 km 36 % Value 0.00949 Reference service life Name Life Span according to the manufacturer Unit kg Value Unit 10 a The service life is not limited due to mechanical obsolescence but due to outdated electronic components/software. It is required that installation, as well as maintenance of the product, must be done in line with instructions provided by the manufacturer. Operational energy use (B6) Two alternatives are declared for the power supply: • B6_1: replacement of the battery every … 0.241 0.349 0.41 Unit kg kg kg kg It is assumed that a 16–32-ton truck is used to transport the product: - Transport to shredding facility for metal recovery: 150 km - Transport to municipal waste incineration plant: 50 km - Transport to landfill: 30 km Reuse, recovery and/or recycling potentials (D), relevant scenario information Module D contains the benefits and loads beyond the system boundary related to the recycling of metals, which result from the treatment of recycled materials from the point of end-ofwaste status to the point of substitution (as costs) and the substitution of primary resources (as benefits). According to EN 16710, clause … "Description of the system boundary", the declared modules are indicated with an "X"; all modules that are not declared within the EPD but where additional data are available are indicated with "MND". Those data can also be used for building assessment scenarios. The values are declared with three valid digits in exponential form. The set of characterisation factors EF3.0 has been used for the life cycle assessment. DESCRIPTION OF THE SYSTEM BOUNDARY (X = INCLUDED IN LCA; MND = MODULE OR INDICATOR NOT DECLARED; MNR = MODULE NOT RELEVANT) Benefits and Construction loads beyond Product stage Use stage End of life stage process stage the system boundaries D X RESULTS OF THE LCA - ENVIRONMENTAL IMPACT according to EN 15804+A2: … kg of electromechanical building hardware and swing door operators Parameter Unit A1-A3 A4 A5 B6/1 B6/2 C1 C2 C3 C4 D GWP-total kg CO2 eq 1.18E+01 6.75E-01 3.14E-01 1.48E+00 2.03E+02 0 1.86E-02 1.86E-02 4.93E-02 4.85E-01 GWP-fossil kg CO2 eq 1.2E+01 6.74E-01 2.26E-02 1.47E+00 2.03E+02 0 1.86E-02 1.85E-02 4.93E-02 4.84E-01 GWPbiogenic kg CO2 eq -2.69E-01 0 2.92E-01 0 0 0 0 0 0 0 7.47E-04 GWP-luluc ODP AP EPfreshwater EP-marine EP-terrestrial kg CO2 eq 2.82E-02 2.7E-04 1.8E-06 2.69E-03 5.07E-01 0 7.44E-06 3.14E-05 3.75E-06 kg CFC11 eq 6.48E-07 1.56E-07 1.02E-09 1.15E-07 1.05E-05 0 4.31E-09 8.96E-10 1.52E-09 3.2E-08 mol H+ eq 3.08E-01 1.91E-03 1.95E-05 3.07E-02 1.11E+00 0 5.28E-05 2.03E-04 4.35E-05 2.35E-02 kg P eq 1.87E-03 4.81E-06 3.74E-08 1.66E-04 2.27E-02 0 1.33E-07 1.06E-06 8.24E-08 7.47E-05 kg N eq mol N eq 3.85E-02 2.8E-01 3.81E-04 4.24E-03 6.46E-06 6.99E-05 2.35E-03 2.81E-02 1.38E-01 1.6E+00 0 0 1.05E-05 1.17E-04 1.67E-05 1.85E-04 1.76E-05 1.7E-04 1.02E-03 1.4E-02 kg NMVOC eq kg Sb eq MJ POCP ADPE ADPF m3 world eq deprived WDP 7.77E-02 1.63E-03 2.03E-05 8.53E-03 4.4E-01 0 4.5E-05 5.78E-05 4.98E-05 4.23E-03 4.07E-03 1.29E+02 2.39E-06 1.02E+01 1.62E-08 6.85E-02 5.7E-04 1.93E+01 1.97E-03 4.27E+03 0 0 6.59E-08 2.82E-01 7.78E-07 2.38E-01 2.26E-08 1.11E-01 5.66E-04 6.82E+00 5.06E+00 3.11E-02 3.36E-04 8.35E-01 5.07E+01 0 8.58E-04 9.87E-03 -3.16E-04 4.14E-01 GWP = Global warming potential; ODP = Depletion potential of the stratospheric ozone layer; AP = Acidification potential of land and water; EP = Eutrophication potential; POCP = Formation potential of tropospheric ozone photochemical oxidants; ADPE = Abiotic depletion potential for non-fossil resources; ADPF = Abiotic depletion potential for fossil resources; WDP = Water (user) deprivation potential) RESULTS OF THE LCA - INDICATORS TO DESCRIBE RESOURCE USE according to EN 15804+A2: … kg of electromechanical building hardware and swing door operators Parameter Unit A1-A3 A4 A5 B6/1 B6/2 C1 C2 C3 C4 D PERE PERM PERT PENRE PENRM PENRT SM RSF NRSF MJ MJ MJ MJ MJ MJ kg MJ MJ 2.15E+01 2.35E+00 2.38E+01 1.31E+02 1.43E+00 1.33E+02 4.47E-01 0 0 1.44E-01 0 1.44E-01 1.02E+01 0 1.02E+01 0 0 0 -6.86E-01 -6.18E-01 -1.3E+00 2.17E-01 -1.48E-01 6.85E-02 0 0 0 2.56E+00 0 2.56E+00 1.93E+01 0 1.93E+01 0 0 0 9.42E+02 0 9.42E+02 4.32E+03 0 4.32E+03 0 0 0 0 0 0 0 0 0 0 0 0 3.96E-03 0 3.96E-03 2.82E-01 0 2.82E-01 0 0 0 9.18E-02 0 9.18E-02 2.39E-01 0 2.39E-01 0 0 0 6.71E-03 0 6.71E-03 1.11E-01 0 1.11E-01 0 0 0 1.33E+00 0 1.33E+00 6.85E+00 0 6.85E+00 0 0 0 FW m3 1.62E-01 1.08E-03 5.13E-05 1.88E-02 2.84E+00 0 2.99E-05 2.75E-04 2.23E-04 6.66E-03 PERE = Use of renewable primary energy excluding renewable primary energy resources used as raw materials; PERM = Use of renewable primary energy resources used as raw materials; PERT = Total use of renewable primary energy resources; PENRE = Use of non-renewable primary energy excluding non-renewable primary energy resources used as raw materials; PENRM = Use of non-renewable primary energy resources used as raw materials; PENRT = Total use of non-renewable primary energy resources; SM = Use of secondary material; RSF = Use of renewable secondary fuels; NRSF = Use of non-renewable secondary fuels; FW = Use of net fresh water RESULTS OF THE LCA – WASTE CATEGORIES AND OUTPUT FLOWS according to EN 15804+A2: … kg kg 1.47E-03 4.71E+00 2.67E-05 5.38E-01 2.49E-07 4.05E-03 7.99E-04 5.53E-01 3.41E-03 1.72E+01 0 0 7.36E-07 1.48E-02 4.47E-07 1.37E-02 C4 D 2.15E-07 3.8E-01 1.92E-04 1.71E-01 Environmental Product Declaration - ARGE – The European Federation of Locks and Building Hardware Manufacturers - Electromechanical building hardware and swing door operators RWD CRU MFR MER EEE EET kg kg kg kg MJ MJ 2.12E-03 0 2.89E-01 0 0 0 1.48E-04 0 0 0 0 0 9.43E-07 0 1.61E-01 0 0 0 9.02E-05 0 0 0 0 0 5.73E-02 0 0 0 0 0 0 0 0 0 0 0 4.08E-06 0 0 0 0 0 1.95E-06 0 6.72E-01 0 0 0 1.41E-06 0 0 0 0 0 5.49E-05 0 0 0 0 0 HWD = Hazardous waste disposed; NHWD = Non-hazardous waste disposed; RWD = Radioactive waste disposed; CRU = Components for re-use; MFR = Materials for recycling; MER = Materials for energy recovery; EEE = Exported electrical energy; EET = Exported thermal energy RESULTS OF THE LCA – additional impact categories according to EN 15804+A2-optional: … kg of electromechanical building hardware and swing door operators Parameter Unit A1-A3 A4 A5 B6/1 B6/2 C1 C2 PM IR ETP-fw HTP-c HTP-nc SQP Disease incidence kBq U235 eq CTUe CTUh CTUh SQP C3 C4 D 1.29E-06 5.42E-08 3.98E-10 1.34E-07 3.24E-06 0 1.49E-09 1.19E-09 1.05E-09 5.38E-08 7.95E-01 2.54E+03 6.79E-08 3.43E-06 1.14E+02 4.44E-02 8.02E+00 2.58E-10 8.11E-09 7.13E+00 2.85E-04 5.87E-02 3.64E-12 1.44E-10 4.58E-02 5.64E-02 2.18E+02 8.96E-09 3.53E-07 1.12E+01 3.89E+01 2.67E+03 8.58E-08 2.7E-06 8.22E+02 0 0 0 0 0 1.22E-03 2.21E-01 7.12E-12 2.24E-10 1.96E-01 1.32E-03 1.06E+00 2.13E-11 5.82E-10 7.52E-02 5.02E-04 5.48E+01 1.22E-11 3.96E-10 1.89E-01 3.51E-02 1.28E+02 5.6E-09 3.81E-07 8.77E+00 PM = Potential incidence of disease due to PM emissions; IR = Potential Human exposure efficiency relative to U235; ETP-fw = Potential comparative Toxic Unit for ecosystems; HTP-c = Potential comparative Toxic Unit for humans (cancerogenic); HTP-nc = Potential comparative Toxic Unit for humans (not cancerogenic); SQP = Potential soil quality index Disclaimer … Environmental Product Declaration - ARGE – The European Federation of Locks and Building Hardware Manufacturers - Electromechanical building hardware and swing door operators No testing results are required by the PCR part B. 8. References Product category rules of IBU IBU (2021) IBU (2021): General Instructions for the EPD Programme of the Institut Bauen und Umwelt e.V. (General Instructions for the IBU EPD Programme). Version 2.0, Institut Bauen und Umwelt, Berlin. IBU (2021) IBU (2021): PCR Part A: Calculation rules for the life cycle assessment and requirements on the project report according to EN 15804+A2. Version … 10117 Berlin Germany +49 (0)30 3087748- 0 info@ibu-epd.com www.ibu-epd.com Programme holder Institut Bauen und Umwelt e.V. Hegelplatz … 10117 Berlin Germany +49 (0)30 3087748- 0 info@ibu-epd.com www.ibu-epd.com Author of the Life Cycle Assessment Dr. Frank Werner - Umwelt & Entwicklung Kammelenbergstrasse 30 9011 St. Gallen Switzerland + 41 (0)44 241 39 06 frank@frankwerner.ch http://www.frankwerner.ch/ Owner of the Declaration ARGE – The European Federation of Locks and Building Hardware Manufacturers Offerstraße 12 42551 Velbert Germany 11 +49 (0)2051 9506 15 mail@arge.org www.arge.org Environmental Product Declaration - ARGE – The European Federation of Locks and Building Hardware Manufacturers - Electromechanical building hardware and swing door operators
… 63 Motor … ABS 0.92 Acetal 0.26 Neodymium 0.0000159 Unit % % % % % % % % Steel is produced by combining iron with carbon as well as other elements depending on the desired characteristics. Components made of steel are formed by stamping or other types of mechanical processing. Stainless steel is produced by combining iron with chromium as well as other elements depending on the desired characteristics. Components made of steel are formed by stamping or other types of mechanical processing. Zamak is an alloy with a base metal of zinc and alloying elements of aluminium, magnesium, and copper. Components made of Zamak are die-cast. Motor, PCB are electronic components, which include copper wiring, etched copper sheets on non-conductive substrates, resistors, transistors, etc. ABS (acrylonitrile butadiene styrene) is a terpolymer polymer made by polymerizing styrene and acrylonitrile in the presence of polybutadiene. Components made of ABS are made by injection moulding or other thermal forming processes. Acetal, or polyoxymethylene (POM), is produced by polymerisation of anhydrous formaldehyde. Components made of Acetal are formed by injection moulding or other thermal … .2023) exceeding 0.1 percentage by mass: Certain components may contain small amounts of lead (CAS no. 7439-92-1) as an alloying element. 2) This product/article/at least one partial article contains other cancerogenic, mutagenic, reprotoxic (CMR) substances in categories 1A or 1B which are not on the ECHA candidate list, exceeding 0.1 percentage by mass: no. 3) Biocide products were added to this construction product or it has been treated with biocide products (this then concerns a treated product as defined by the (EU) Ordinance on Biocide Products No. 528/2012): no. … 0.63 - … kg of biogenic carbon is equivalent to 44/12 kg of CO2. Name Value Unit kg 0 C kg 0.0678 C Biogenic carbon content in product Biogenic carbon content in accompanying packaging The following information is the basis of the declared modules within the LCA in this EPD. Transport to the building site (A4) Name Litres of fuel Transport distance Capacity utilisation (including empty runs) Installation into the building (A5) Name Material loss Value Unit … l/100km 3500 km 36 % Value 0.00949 Reference service life Name Life Span according to the manufacturer Unit kg Value Unit 10 a The service life is not limited due to mechanical obsolescence but due to outdated electronic components/software. It is required that installation, as well as maintenance of the product, must be done in line with instructions provided by the manufacturer. Operational energy use (B6) Two alternatives are declared for the power supply: • B6_1: replacement of the battery every … 0.241 0.349 0.41 Unit kg kg kg kg It is assumed that a 16–32-ton truck is used to transport the product: - Transport to shredding facility for metal recovery: 150 km - Transport to municipal waste incineration plant: 50 km - Transport to landfill: 30 km Reuse, recovery and/or recycling potentials (D), relevant scenario information Module D contains the benefits and loads beyond the system boundary related to the recycling of metals, which result from the treatment of recycled materials from the point of end-ofwaste status to the point of substitution (as costs) and the substitution of primary resources (as benefits). According to EN 16710, clause … "Description of the system boundary", the declared modules are indicated with an "X"; all modules that are not declared within the EPD but where additional data are available are indicated with "MND". Those data can also be used for building assessment scenarios. The values are declared with three valid digits in exponential form. The set of characterisation factors EF3.0 has been used for the life cycle assessment. DESCRIPTION OF THE SYSTEM BOUNDARY (X = INCLUDED IN LCA; MND = MODULE OR INDICATOR NOT DECLARED; MNR = MODULE NOT RELEVANT) Benefits and Construction loads beyond Product stage Use stage End of life stage process stage the system boundaries D X RESULTS OF THE LCA - ENVIRONMENTAL IMPACT according to EN 15804+A2: … kg of electromechanical building hardware and swing door operators Parameter Unit A1-A3 A4 A5 B6/1 B6/2 C1 C2 C3 C4 D GWP-total kg CO2 eq 1.18E+01 6.75E-01 3.14E-01 1.48E+00 2.03E+02 0 1.86E-02 1.86E-02 4.93E-02 4.85E-01 GWP-fossil kg CO2 eq 1.2E+01 6.74E-01 2.26E-02 1.47E+00 2.03E+02 0 1.86E-02 1.85E-02 4.93E-02 4.84E-01 GWPbiogenic kg CO2 eq -2.69E-01 0 2.92E-01 0 0 0 0 0 0 0 7.47E-04 GWP-luluc ODP AP EPfreshwater EP-marine EP-terrestrial kg CO2 eq 2.82E-02 2.7E-04 1.8E-06 2.69E-03 5.07E-01 0 7.44E-06 3.14E-05 3.75E-06 kg CFC11 eq 6.48E-07 1.56E-07 1.02E-09 1.15E-07 1.05E-05 0 4.31E-09 8.96E-10 1.52E-09 3.2E-08 mol H+ eq 3.08E-01 1.91E-03 1.95E-05 3.07E-02 1.11E+00 0 5.28E-05 2.03E-04 4.35E-05 2.35E-02 kg P eq 1.87E-03 4.81E-06 3.74E-08 1.66E-04 2.27E-02 0 1.33E-07 1.06E-06 8.24E-08 7.47E-05 kg N eq mol N eq 3.85E-02 2.8E-01 3.81E-04 4.24E-03 6.46E-06 6.99E-05 2.35E-03 2.81E-02 1.38E-01 1.6E+00 0 0 1.05E-05 1.17E-04 1.67E-05 1.85E-04 1.76E-05 1.7E-04 1.02E-03 1.4E-02 kg NMVOC eq kg Sb eq MJ POCP ADPE ADPF m3 world eq deprived WDP 7.77E-02 1.63E-03 2.03E-05 8.53E-03 4.4E-01 0 4.5E-05 5.78E-05 4.98E-05 4.23E-03 4.07E-03 1.29E+02 2.39E-06 1.02E+01 1.62E-08 6.85E-02 5.7E-04 1.93E+01 1.97E-03 4.27E+03 0 0 6.59E-08 2.82E-01 7.78E-07 2.38E-01 2.26E-08 1.11E-01 5.66E-04 6.82E+00 5.06E+00 3.11E-02 3.36E-04 8.35E-01 5.07E+01 0 8.58E-04 9.87E-03 -3.16E-04 4.14E-01 GWP = Global warming potential; ODP = Depletion potential of the stratospheric ozone layer; AP = Acidification potential of land and water; EP = Eutrophication potential; POCP = Formation potential of tropospheric ozone photochemical oxidants; ADPE = Abiotic depletion potential for non-fossil resources; ADPF = Abiotic depletion potential for fossil resources; WDP = Water (user) deprivation potential) RESULTS OF THE LCA - INDICATORS TO DESCRIBE RESOURCE USE according to EN 15804+A2: … kg of electromechanical building hardware and swing door operators Parameter Unit A1-A3 A4 A5 B6/1 B6/2 C1 C2 C3 C4 D PERE PERM PERT PENRE PENRM PENRT SM RSF NRSF MJ MJ MJ MJ MJ MJ kg MJ MJ 2.15E+01 2.35E+00 2.38E+01 1.31E+02 1.43E+00 1.33E+02 4.47E-01 0 0 1.44E-01 0 1.44E-01 1.02E+01 0 1.02E+01 0 0 0 -6.86E-01 -6.18E-01 -1.3E+00 2.17E-01 -1.48E-01 6.85E-02 0 0 0 2.56E+00 0 2.56E+00 1.93E+01 0 1.93E+01 0 0 0 9.42E+02 0 9.42E+02 4.32E+03 0 4.32E+03 0 0 0 0 0 0 0 0 0 0 0 0 3.96E-03 0 3.96E-03 2.82E-01 0 2.82E-01 0 0 0 9.18E-02 0 9.18E-02 2.39E-01 0 2.39E-01 0 0 0 6.71E-03 0 6.71E-03 1.11E-01 0 1.11E-01 0 0 0 1.33E+00 0 1.33E+00 6.85E+00 0 6.85E+00 0 0 0 FW m3 1.62E-01 1.08E-03 5.13E-05 1.88E-02 2.84E+00 0 2.99E-05 2.75E-04 2.23E-04 6.66E-03 PERE = Use of renewable primary energy excluding renewable primary energy resources used as raw materials; PERM = Use of renewable primary energy resources used as raw materials; PERT = Total use of renewable primary energy resources; PENRE = Use of non-renewable primary energy excluding non-renewable primary energy resources used as raw materials; PENRM = Use of non-renewable primary energy resources used as raw materials; PENRT = Total use of non-renewable primary energy resources; SM = Use of secondary material; RSF = Use of renewable secondary fuels; NRSF = Use of non-renewable secondary fuels; FW = Use of net fresh water RESULTS OF THE LCA – WASTE CATEGORIES AND OUTPUT FLOWS according to EN 15804+A2: … kg kg 1.47E-03 4.71E+00 2.67E-05 5.38E-01 2.49E-07 4.05E-03 7.99E-04 5.53E-01 3.41E-03 1.72E+01 0 0 7.36E-07 1.48E-02 4.47E-07 1.37E-02 C4 D 2.15E-07 3.8E-01 1.92E-04 1.71E-01 Environmental Product Declaration - ARGE – The European Federation of Locks and Building Hardware Manufacturers - Electromechanical building hardware and swing door operators RWD CRU MFR MER EEE EET kg kg kg kg MJ MJ 2.12E-03 0 2.89E-01 0 0 0 1.48E-04 0 0 0 0 0 9.43E-07 0 1.61E-01 0 0 0 9.02E-05 0 0 0 0 0 5.73E-02 0 0 0 0 0 0 0 0 0 0 0 4.08E-06 0 0 0 0 0 1.95E-06 0 6.72E-01 0 0 0 1.41E-06 0 0 0 0 0 5.49E-05 0 0 0 0 0 HWD = Hazardous waste disposed; NHWD = Non-hazardous waste disposed; RWD = Radioactive waste disposed; CRU = Components for re-use; MFR = Materials for recycling; MER = Materials for energy recovery; EEE = Exported electrical energy; EET = Exported thermal energy RESULTS OF THE LCA – additional impact categories according to EN 15804+A2-optional: … kg of electromechanical building hardware and swing door operators Parameter Unit A1-A3 A4 A5 B6/1 B6/2 C1 C2 PM IR ETP-fw HTP-c HTP-nc SQP Disease incidence kBq U235 eq CTUe CTUh CTUh SQP C3 C4 D 1.29E-06 5.42E-08 3.98E-10 1.34E-07 3.24E-06 0 1.49E-09 1.19E-09 1.05E-09 5.38E-08 7.95E-01 2.54E+03 6.79E-08 3.43E-06 1.14E+02 4.44E-02 8.02E+00 2.58E-10 8.11E-09 7.13E+00 2.85E-04 5.87E-02 3.64E-12 1.44E-10 4.58E-02 5.64E-02 2.18E+02 8.96E-09 3.53E-07 1.12E+01 3.89E+01 2.67E+03 8.58E-08 2.7E-06 8.22E+02 0 0 0 0 0 1.22E-03 2.21E-01 7.12E-12 2.24E-10 1.96E-01 1.32E-03 1.06E+00 2.13E-11 5.82E-10 7.52E-02 5.02E-04 5.48E+01 1.22E-11 3.96E-10 1.89E-01 3.51E-02 1.28E+02 5.6E-09 3.81E-07 8.77E+00 PM = Potential incidence of disease due to PM emissions; IR = Potential Human exposure efficiency relative to U235; ETP-fw = Potential comparative Toxic Unit for ecosystems; HTP-c = Potential comparative Toxic Unit for humans (cancerogenic); HTP-nc = Potential comparative Toxic Unit for humans (not cancerogenic); SQP = Potential soil quality index Disclaimer … Environmental Product Declaration - ARGE – The European Federation of Locks and Building Hardware Manufacturers - Electromechanical building hardware and swing door operators No testing results are required by the PCR part B. 8. References Product category rules of IBU IBU (2021) IBU (2021): General Instructions for the EPD Programme of the Institut Bauen und Umwelt e.V. (General Instructions for the IBU EPD Programme). Version 2.0, Institut Bauen und Umwelt, Berlin. IBU (2021) IBU (2021): PCR Part A: Calculation rules for the life cycle assessment and requirements on the project report according to EN 15804+A2. Version … 10117 Berlin Germany +49 (0)30 3087748- 0 info@ibu-epd.com www.ibu-epd.com Programme holder Institut Bauen und Umwelt e.V. Hegelplatz … 10117 Berlin Germany +49 (0)30 3087748- 0 info@ibu-epd.com www.ibu-epd.com Author of the Life Cycle Assessment Dr. Frank Werner - Umwelt & Entwicklung Kammelenbergstrasse 30 9011 St. Gallen Switzerland + 41 (0)44 241 39 06 frank@frankwerner.ch http://www.frankwerner.ch/ Owner of the Declaration ARGE – The European Federation of Locks and Building Hardware Manufacturers Offerstraße 12 42551 Velbert Germany 11 +49 (0)2051 9506 15 mail@arge.org www.arge.org Environmental Product Declaration - ARGE – The European Federation of Locks and Building Hardware Manufacturers - Electromechanical building hardware and swing door operators
… 63 Motor … ABS 0.92 Acetal 0.26 Neodymium 0.0000159 Unit % % % % % % % % Steel is produced by combining iron with carbon as well as other elements depending on the desired characteristics. Components made of steel are formed by stamping or other types of mechanical processing. Stainless steel is produced by combining iron with chromium as well as other elements depending on the desired characteristics. Components made of steel are formed by stamping or other types of mechanical processing. Zamak is an alloy with a base metal of zinc and alloying elements of aluminium, magnesium, and copper. Components made of Zamak are die-cast. Motor, PCB are electronic components, which include copper wiring, etched copper sheets on non-conductive substrates, resistors, transistors, etc. ABS (acrylonitrile butadiene styrene) is a terpolymer polymer made by polymerizing styrene and acrylonitrile in the presence of polybutadiene. Components made of ABS are made by injection moulding or other thermal forming processes. Acetal, or polyoxymethylene (POM), is produced by polymerisation of anhydrous formaldehyde. Components made of Acetal are formed by injection moulding or other thermal … .2023) exceeding 0.1 percentage by mass: Certain components may contain small amounts of lead (CAS no. 7439-92-1) as an alloying element. 2) This product/article/at least one partial article contains other cancerogenic, mutagenic, reprotoxic (CMR) substances in categories 1A or 1B which are not on the ECHA candidate list, exceeding 0.1 percentage by mass: no. 3) Biocide products were added to this construction product or it has been treated with biocide products (this then concerns a treated product as defined by the (EU) Ordinance on Biocide Products No. 528/2012): no. … 0.63 - … kg of biogenic carbon is equivalent to 44/12 kg of CO2. Name Value Unit kg 0 C kg 0.0678 C Biogenic carbon content in product Biogenic carbon content in accompanying packaging The following information is the basis of the declared modules within the LCA in this EPD. Transport to the building site (A4) Name Litres of fuel Transport distance Capacity utilisation (including empty runs) Installation into the building (A5) Name Material loss Value Unit … l/100km 3500 km 36 % Value 0.00949 Reference service life Name Life Span according to the manufacturer Unit kg Value Unit 10 a The service life is not limited due to mechanical obsolescence but due to outdated electronic components/software. It is required that installation, as well as maintenance of the product, must be done in line with instructions provided by the manufacturer. Operational energy use (B6) Two alternatives are declared for the power supply: • B6_1: replacement of the battery every … 0.241 0.349 0.41 Unit kg kg kg kg It is assumed that a 16–32-ton truck is used to transport the product: - Transport to shredding facility for metal recovery: 150 km - Transport to municipal waste incineration plant: 50 km - Transport to landfill: 30 km Reuse, recovery and/or recycling potentials (D), relevant scenario information Module D contains the benefits and loads beyond the system boundary related to the recycling of metals, which result from the treatment of recycled materials from the point of end-ofwaste status to the point of substitution (as costs) and the substitution of primary resources (as benefits). According to EN 16710, clause … "Description of the system boundary", the declared modules are indicated with an "X"; all modules that are not declared within the EPD but where additional data are available are indicated with "MND". Those data can also be used for building assessment scenarios. The values are declared with three valid digits in exponential form. The set of characterisation factors EF3.0 has been used for the life cycle assessment. DESCRIPTION OF THE SYSTEM BOUNDARY (X = INCLUDED IN LCA; MND = MODULE OR INDICATOR NOT DECLARED; MNR = MODULE NOT RELEVANT) Benefits and Construction loads beyond Product stage Use stage End of life stage process stage the system boundaries D X RESULTS OF THE LCA - ENVIRONMENTAL IMPACT according to EN 15804+A2: … kg of electromechanical building hardware and swing door operators Parameter Unit A1-A3 A4 A5 B6/1 B6/2 C1 C2 C3 C4 D GWP-total kg CO2 eq 1.18E+01 6.75E-01 3.14E-01 1.48E+00 2.03E+02 0 1.86E-02 1.86E-02 4.93E-02 4.85E-01 GWP-fossil kg CO2 eq 1.2E+01 6.74E-01 2.26E-02 1.47E+00 2.03E+02 0 1.86E-02 1.85E-02 4.93E-02 4.84E-01 GWPbiogenic kg CO2 eq -2.69E-01 0 2.92E-01 0 0 0 0 0 0 0 7.47E-04 GWP-luluc ODP AP EPfreshwater EP-marine EP-terrestrial kg CO2 eq 2.82E-02 2.7E-04 1.8E-06 2.69E-03 5.07E-01 0 7.44E-06 3.14E-05 3.75E-06 kg CFC11 eq 6.48E-07 1.56E-07 1.02E-09 1.15E-07 1.05E-05 0 4.31E-09 8.96E-10 1.52E-09 3.2E-08 mol H+ eq 3.08E-01 1.91E-03 1.95E-05 3.07E-02 1.11E+00 0 5.28E-05 2.03E-04 4.35E-05 2.35E-02 kg P eq 1.87E-03 4.81E-06 3.74E-08 1.66E-04 2.27E-02 0 1.33E-07 1.06E-06 8.24E-08 7.47E-05 kg N eq mol N eq 3.85E-02 2.8E-01 3.81E-04 4.24E-03 6.46E-06 6.99E-05 2.35E-03 2.81E-02 1.38E-01 1.6E+00 0 0 1.05E-05 1.17E-04 1.67E-05 1.85E-04 1.76E-05 1.7E-04 1.02E-03 1.4E-02 kg NMVOC eq kg Sb eq MJ POCP ADPE ADPF m3 world eq deprived WDP 7.77E-02 1.63E-03 2.03E-05 8.53E-03 4.4E-01 0 4.5E-05 5.78E-05 4.98E-05 4.23E-03 4.07E-03 1.29E+02 2.39E-06 1.02E+01 1.62E-08 6.85E-02 5.7E-04 1.93E+01 1.97E-03 4.27E+03 0 0 6.59E-08 2.82E-01 7.78E-07 2.38E-01 2.26E-08 1.11E-01 5.66E-04 6.82E+00 5.06E+00 3.11E-02 3.36E-04 8.35E-01 5.07E+01 0 8.58E-04 9.87E-03 -3.16E-04 4.14E-01 GWP = Global warming potential; ODP = Depletion potential of the stratospheric ozone layer; AP = Acidification potential of land and water; EP = Eutrophication potential; POCP = Formation potential of tropospheric ozone photochemical oxidants; ADPE = Abiotic depletion potential for non-fossil resources; ADPF = Abiotic depletion potential for fossil resources; WDP = Water (user) deprivation potential) RESULTS OF THE LCA - INDICATORS TO DESCRIBE RESOURCE USE according to EN 15804+A2: … kg of electromechanical building hardware and swing door operators Parameter Unit A1-A3 A4 A5 B6/1 B6/2 C1 C2 C3 C4 D PERE PERM PERT PENRE PENRM PENRT SM RSF NRSF MJ MJ MJ MJ MJ MJ kg MJ MJ 2.15E+01 2.35E+00 2.38E+01 1.31E+02 1.43E+00 1.33E+02 4.47E-01 0 0 1.44E-01 0 1.44E-01 1.02E+01 0 1.02E+01 0 0 0 -6.86E-01 -6.18E-01 -1.3E+00 2.17E-01 -1.48E-01 6.85E-02 0 0 0 2.56E+00 0 2.56E+00 1.93E+01 0 1.93E+01 0 0 0 9.42E+02 0 9.42E+02 4.32E+03 0 4.32E+03 0 0 0 0 0 0 0 0 0 0 0 0 3.96E-03 0 3.96E-03 2.82E-01 0 2.82E-01 0 0 0 9.18E-02 0 9.18E-02 2.39E-01 0 2.39E-01 0 0 0 6.71E-03 0 6.71E-03 1.11E-01 0 1.11E-01 0 0 0 1.33E+00 0 1.33E+00 6.85E+00 0 6.85E+00 0 0 0 FW m3 1.62E-01 1.08E-03 5.13E-05 1.88E-02 2.84E+00 0 2.99E-05 2.75E-04 2.23E-04 6.66E-03 PERE = Use of renewable primary energy excluding renewable primary energy resources used as raw materials; PERM = Use of renewable primary energy resources used as raw materials; PERT = Total use of renewable primary energy resources; PENRE = Use of non-renewable primary energy excluding non-renewable primary energy resources used as raw materials; PENRM = Use of non-renewable primary energy resources used as raw materials; PENRT = Total use of non-renewable primary energy resources; SM = Use of secondary material; RSF = Use of renewable secondary fuels; NRSF = Use of non-renewable secondary fuels; FW = Use of net fresh water RESULTS OF THE LCA – WASTE CATEGORIES AND OUTPUT FLOWS according to EN 15804+A2: … kg kg 1.47E-03 4.71E+00 2.67E-05 5.38E-01 2.49E-07 4.05E-03 7.99E-04 5.53E-01 3.41E-03 1.72E+01 0 0 7.36E-07 1.48E-02 4.47E-07 1.37E-02 C4 D 2.15E-07 3.8E-01 1.92E-04 1.71E-01 Environmental Product Declaration - ARGE – The European Federation of Locks and Building Hardware Manufacturers - Electromechanical building hardware and swing door operators RWD CRU MFR MER EEE EET kg kg kg kg MJ MJ 2.12E-03 0 2.89E-01 0 0 0 1.48E-04 0 0 0 0 0 9.43E-07 0 1.61E-01 0 0 0 9.02E-05 0 0 0 0 0 5.73E-02 0 0 0 0 0 0 0 0 0 0 0 4.08E-06 0 0 0 0 0 1.95E-06 0 6.72E-01 0 0 0 1.41E-06 0 0 0 0 0 5.49E-05 0 0 0 0 0 HWD = Hazardous waste disposed; NHWD = Non-hazardous waste disposed; RWD = Radioactive waste disposed; CRU = Components for re-use; MFR = Materials for recycling; MER = Materials for energy recovery; EEE = Exported electrical energy; EET = Exported thermal energy RESULTS OF THE LCA – additional impact categories according to EN 15804+A2-optional: … kg of electromechanical building hardware and swing door operators Parameter Unit A1-A3 A4 A5 B6/1 B6/2 C1 C2 PM IR ETP-fw HTP-c HTP-nc SQP Disease incidence kBq U235 eq CTUe CTUh CTUh SQP C3 C4 D 1.29E-06 5.42E-08 3.98E-10 1.34E-07 3.24E-06 0 1.49E-09 1.19E-09 1.05E-09 5.38E-08 7.95E-01 2.54E+03 6.79E-08 3.43E-06 1.14E+02 4.44E-02 8.02E+00 2.58E-10 8.11E-09 7.13E+00 2.85E-04 5.87E-02 3.64E-12 1.44E-10 4.58E-02 5.64E-02 2.18E+02 8.96E-09 3.53E-07 1.12E+01 3.89E+01 2.67E+03 8.58E-08 2.7E-06 8.22E+02 0 0 0 0 0 1.22E-03 2.21E-01 7.12E-12 2.24E-10 1.96E-01 1.32E-03 1.06E+00 2.13E-11 5.82E-10 7.52E-02 5.02E-04 5.48E+01 1.22E-11 3.96E-10 1.89E-01 3.51E-02 1.28E+02 5.6E-09 3.81E-07 8.77E+00 PM = Potential incidence of disease due to PM emissions; IR = Potential Human exposure efficiency relative to U235; ETP-fw = Potential comparative Toxic Unit for ecosystems; HTP-c = Potential comparative Toxic Unit for humans (cancerogenic); HTP-nc = Potential comparative Toxic Unit for humans (not cancerogenic); SQP = Potential soil quality index Disclaimer … Environmental Product Declaration - ARGE – The European Federation of Locks and Building Hardware Manufacturers - Electromechanical building hardware and swing door operators No testing results are required by the PCR part B. 8. References Product category rules of IBU IBU (2021) IBU (2021): General Instructions for the EPD Programme of the Institut Bauen und Umwelt e.V. (General Instructions for the IBU EPD Programme). Version 2.0, Institut Bauen und Umwelt, Berlin. IBU (2021) IBU (2021): PCR Part A: Calculation rules for the life cycle assessment and requirements on the project report according to EN 15804+A2. Version … 10117 Berlin Germany +49 (0)30 3087748- 0 info@ibu-epd.com www.ibu-epd.com Programme holder Institut Bauen und Umwelt e.V. Hegelplatz … 10117 Berlin Germany +49 (0)30 3087748- 0 info@ibu-epd.com www.ibu-epd.com Author of the Life Cycle Assessment Dr. Frank Werner - Umwelt & Entwicklung Kammelenbergstrasse 30 9011 St. Gallen Switzerland + 41 (0)44 241 39 06 frank@frankwerner.ch http://www.frankwerner.ch/ Owner of the Declaration ARGE – The European Federation of Locks and Building Hardware Manufacturers Offerstraße 12 42551 Velbert Germany 11 +49 (0)2051 9506 15 mail@arge.org www.arge.org Environmental Product Declaration - ARGE – The European Federation of Locks and Building Hardware Manufacturers - Electromechanical building hardware and swing door operators
… 63 GEZE Glass Fittings PT 63, PT 84, PT 90 PT 63 PT 90 PT 90 PT 90 PT 90 PT 84 PT 90 177996-00 PT 63 PT 84 PT 90 … ESG 12 mm PT 63 … 5 mm PT 63 … GEZE GmbH Reinhold-Vöster-Strasse 21–29 71229 Leonberg Germany PT 90 PT 84 PT 63 click Tel.: 0049 7152 203-0 Fax: 0049 7152 203-310 www.geze.com
… 63 63 zweiter Antrieb RSZ 24V 62 62 RSZ 24V RSZ GND 61 61 RSZ GND ALARM NO 12 ALARM COM 11 ALARM NC 10 Eingang RS … Siehe Zulassung EMD F/R Mat. Nr. 142194 Ä-St. 0 Beiblatt EMD F und EMD F-IS mit integriertem Rauchschalter ORS141 1/4 *) Türantrieb EMD F mit integriertem Rauchschalter Steuerung DCU2-F DCU201 Integrierter RS ORS141 JP2 61 RSZ GND 63 zweiter Antrieb 62 RSZ 24V 61 RSZ GND ALARM NO 12 ALARM COM 11 ALARM NC 10 Eingang RS … Siehe Zulassung EMD F/R Mat. Nr. 142194 Ä-St. 0 Beiblatt EMD F und EMD F-IS mit integriertem Rauchschalter ORS141 2/4 Connection of smoke switch ORS141 to control unit DCU2-F • Observe the wiring diagram Slimdrive EMD, EMD F Abbreviations GF SF RSZ 24V RSZ GND RS • • • Active leaf drive Fixed leaf drive Input, hold-open + Input, hold-open – Smoke switch Remove Jumper JP1 (black) if circuit breaker is connected Remove Jumper JP2 (red) if additional smoke switches are connected For additional information, see wiring diagram, chapter Smoke switch control unit Door drive EMD F-IS with integrated smoke switch *) GF control unit DCU2-F DCU201 Integrated RS ORS141 ALARM NO 12 JP2 JP1 SF control unit DCU2-F DCU201 RSZ GND 61 61 RSZ GND Second drive 63 63 Second drive RSZ 24V 62 62 RSZ 24V RSZ GND 61 61 RSZ GND ALARM COM 11 ALARM NC 10 Input RS … *) See approval EMD F/R Mat. No. 142194 State of change 0 Max. … Supplementary sheet EMD F and EMD F-IS with integrated smoke switch ORS141 3/4 Door drive EMD F with integrated smoke switch *) Control unit DCU2-F DCU201 Integrated RS ORS141 JP2 JP1 61 RSZ GND 63 Second drive 62 RSZ 24V 61 RSZ GND ALARM NO 12 ALARM COM 11 ALARM NC 10 Input RS … See approval EMD F/R Mat. No. 142194 State of change 0 Supplementary sheet EMD F and EMD F-IS with integrated smoke switch ORS141 4/4
… 0..15 (15) (0) permanent 4s-interval 2s-interval … beep (2 beep) 0..15 (15) permanent 4s-interval 2s-interval … beep (4s-interval) 0..15 (15) permanent 4s-interval 2s-interval … beep (4 beep) on off (on) custom inputs TZ input1 TZ input2 TZ input3 custom outputs TZ output1 configuration TZ1 choice activity TZ1 choice configuration TZ2 activity TZ2 configuration TZ3 activity TZ3 configuration TZ1 choice choice choice choice choice contact TZ1 choice sabotage ext. unlock lock short-term unl. burglar alert time switch fire alarm motor lock handle holiday disable del. EB (short-term u.) high-active low-active disabled (high-active) (short-term u.) (high-active) (burglary al.) (high-active) door state OM drive drive control alarm release release direct release ind. door alarm sabotage alarm pre-alarm system fault traffic l. red traffic l. gr. door-o. op.cur. locked emergency but. short-term unl. coll. alarm coll. locked coll. closed (alarm) opener closer disabled TZ output2 delayed em. Button delay time system environment KL220 configuration TZ2 contact TZ2 change value abort choice available choice custom inputs KL input1 KL input2 KL input3 KL input4 custom outputs KL output1 choice choice configuration KL1 choice activity KL1 choice configuration activity KL2 configuration activity KL3 configuration activity KL4 configuration KL2 KL3 KL4 KL1 choice choice choice choice choice choice choice (closer) (door-o. op.c.) (closer) 0s..5min (0s) yes no (no) available unavailable (unavailable) sabotage ext. unlock lock short-term unl. burglar alert time switch fire alarm motor lock handle holiday disable del. EB (burglar alert) high-active low-active disabled (high-active) (time-switch) (high-active) (unlock) (high-active) (lock) (high-active) door state OM drive drive control alarm release release direct release ind. door alarm sabotage alarm pre-alarm contact KL1 KL output2 KL output3 KL output4 KL output5 KL output6 TT220 choice sabotage contacts TZ choice SCT KL choice choice TT choice invers door drive choice internal T-S time-switch1 start time end time configuration contact KL2 configuration contact KL3 configuration contact KL4 configuration contact KL5 configuration contact KL6 hour minute hour choice KL2 KL3 KL4 KL5 KL6 choice choice choice choice choice choice choice choice choice choice change value change value change value system fault traffic l. red traffic l. gr. door-o. op.cur. locked emergency but. short-term unl. coll. alarm coll. locked coll. closed (BA-drive) opener closer disabled (closer) (drive control) (closer) (locked) (closer) (door state) (closer) (sabotage a.) (closer) (system fault) (closer) available unavailable (unavailable) active inactive (active) (inactive) (inactive) (active) (inactive) (active) (inactive) available unavailable (unavailable) 0..23 (0) 0..59 (0) 0..23 (0) days time-switch2 start time end time days time-switch3 start time end time days system setup clock/date clock date weekday hour minute day month year change value minute Monday change value choice Tuesday Wednesday Thursday Friday Saturday Sunday hour minute hour minute Monday choice choice choice choice choice choice change change change change choice Tuesday Wednesday Thursday Friday Saturday Sunday hour minute hour minute Monday choice choice choice choice choice choice change change change change choice Tuesday Wednesday Thursday Friday Saturday Sunday change value change value change value change value change value choice choice choice choice choice choice value value value value value value value value 0..59 (0) active inactive (active) (active) (active) (active) (active) (inactive) (inactive) 0..23 (0) 0..59 (0) 0..23 (0) 0..59 (0) active inactive (active) (active) (active) (active) (active) (inactive) (inactive) 0..23 (0) 0..59 (0) 0..23 (0) 0..59 (0) active inactive (active) (active) (active) (active) (active) (inactive) (inactive) 0..23 (12) 0..59 (00) 1..31 (01) 1..12 (09) 0..99 (08) Monday aut. clock change bus configuration language choice default settings choice bus-address change value change value burglar alarm sys. groupe1 choice groupe2 groupe3 groupe4 groupe5 groupe1 groupe2 groupe3 groupe4 groupe5 groupe1 groupe2 groupe3 groupe4 groupe5 choice choice choice choice choice choice choice choice choice choice choice choice choice choice sluice type choice fire alarm system time-switch bus release sluice Tuesday Wednesday Thursday Friday Saturday Sunday (Friday) on off (off) German English French (German) (English) reset system keep settings 0..63 (0) busfunction off busfunction on master busf. (busf. off) (busf. off) (busf. off) (busf. off) (busf. off) (busf. off) (busf. off) (busf. off) (busf. off) (busf. off) (busf. off) (busf. off) (busf. off) (busf. off) (busf. off) busf. off busf. on (busf. on) active passive disabled assignment diagnosis alarm memory version display list display For control unit TST321 (delayed emergency button; V1.0) only. groupe1 choice groupe2 groupe3 groupe4 groupe5 groupe6 groupe7 groupe8 groupe9 groupe10 choice choice choice choice choice choice choice choice choice (disabled) assigned not assigned (not assigned) (not assigned) (not assigned) (not assigned) (not assigned) (not assigned) (not assigned) (not assigned) (not assigned) (not assigned)
… 0-5 Grade Security – burglar resistance Grade Category of door 1, 2, … Base materials/Ancillary materials Composition of product analysed for this EPD: The values given are for the product analysed for this EPD. Ranges of the values for other products covered by the validity scope analysis are given in brackets. Name Value Unit Aluminium (0.00% – … (0.00% – … % Steel (0.31% – … %) 0.31 % Aluminium is a non-ferrous metal produced from bauxite by the Bayer process. Components made of aluminium are manufactured by extrusion or other types of mechanical processing. Nylon … .2023) exceeding 0.1 percentage by mass: Certain components may contain small amounts of lead (CAS no. 7439-92-1) as an alloying element. 2) This product/article/at least one partial article contains other cancerogenic, mutagenic, reprotoxic (CMR) substances in categories 1A or 1B which are not on the ECHA candidate list, exceeding 0.1 percentage by mass: no. 3) Biocide products were added to this construction product or it has been treated with biocide products (this then concerns a treated product as defined by the (EU) Ordinance on Biocide Products No. 528/2012): no. … kg of biogenic carbon is equivalent to 44/12 kg of CO2. Name Biogenic carbon content in product Biogenic carbon content in accompanying packaging Value Unit kg 0 C kg 0.0354 C The following information is the basis of the declared modules within the LCA in this EPD. Transport to the building site (A4) Name Litres of fuel Transport distance Installation into the building (A5) Name Material loss Value … 3500 Value 0.144 Reference service life Name Reference service life Test cycles over RSL (EN 1527, EN 15706) End of life (C1-C4) Name Collected separately waste type Recycling Energy recovery Landfilling … 0.472 0.243 0.285 Unit kg kg kg kg It is assumed that a 16–32-ton truck is used to transport the product: - Transport to shredding facility for metal recovery: 150 km - Transport to municipal waste incineration plant: 50 km - Transport to landfill: 30 km Reuse, recovery and/or recycling potentials (D), relevant scenario information Module D contains the benefits and loads beyond the system boundary related to the recycling of metals, which result from the treatment of recycled materials from the point of end-ofwaste status to the point of substitution (as costs) and the substitution of primary resources (as benefits). According to EN 16710, clause … "Description of the system boundary", the declared modules are indicated with an "X"; all modules that are not declared within the EPD but where additional data are available are indicated with "MND". Those data can also be used for building assessment scenarios. The values are declared with three valid digits in exponential form. DESCRIPTION OF THE SYSTEM BOUNDARY (X = INCLUDED IN LCA; MND = MODULE OR INDICATOR NOT DECLARED; MNR = MODULE NOT RELEVANT) Benefits and loads beyond Construction Product stage Use stage End of life stage the system process stage boundaries D X C4 D GWP-total kg CO2 eq 1.7E+01 6.21E-01 1.43E-01 0 1.65E-02 3.67E-03 2.56E-02 -6.52E+00 GWP-fossil kg CO2 eq 1.71E+01 6.21E-01 1.33E-02 0 1.65E-02 3.66E-03 2.56E-02 -6.49E+00 GWP-biogenic kg CO2 eq -1.3E-01 0 1.3E-01 0 0 0 0 0 GWP-luluc kg CO2 eq 4.66E-02 2.48E-04 8.53E-07 0 6.59E-06 9.13E-06 3.39E-06 -2.42E-02 kg CFC11 eq 6.55E-07 1.44E-07 4.89E-10 0 3.82E-09 1.86E-10 1.63E-09 -2.15E-07 mol H+ eq kg P eq kg N eq mol N eq kg NMVOC eq kg Sb eq MJ 1.16E-01 5.65E-04 1.79E-02 1.97E-01 1.76E-03 4.43E-06 3.5E-04 3.9E-03 7.88E-06 1.63E-08 2.15E-06 2.36E-05 0 0 0 0 4.68E-05 1.17E-07 9.3E-06 1.04E-04 1.89E-05 4.11E-07 2.42E-06 2.79E-05 4.74E-05 8.81E-08 1.83E-05 1.91E-04 -4.25E-02 -2.37E-04 -6.3E-03 -6.94E-02 5.73E-02 1.5E-03 7.53E-06 0 3.98E-05 7.64E-06 5.56E-05 -2.06E-02 1.1E-04 1.67E+02 2.2E-06 9.41E+00 7.63E-09 3.26E-02 0 0 5.84E-08 2.5E-01 8.87E-09 7.76E-02 2.87E-08 1.26E-01 3.27E-05 -5.83E+01 2.62E+00 2.86E-02 1.43E-04 0 7.6E-04 8.67E-04 -1.14E-03 -8.94E-01 ODP AP EP-freshwater EP-marine EP-terrestrial POCP ADPE ADPF WDP m3 world eq deprived GWP = Global warming potential; ODP = Depletion potential of the stratospheric ozone layer; AP = Acidification potential of land and water; EP = Eutrophication potential; POCP = Formation potential of tropospheric ozone photochemical oxidants; ADPE = Abiotic depletion potential for non-fossil resources; ADPF = Abiotic depletion potential for fossil resources; WDP = Water (user) deprivation potential) RESULTS OF THE LCA - INDICATORS TO DESCRIBE RESOURCE USE according to EN 15804+A2: … kg of sliding door gear Parameter Unit A1-A3 A4 A5 C1 C2 C3 C4 D PERE PERM PERT PENRE PENRM PENRT SM RSF NRSF MJ MJ MJ MJ MJ MJ kg MJ MJ 1.79E+01 8.04E-01 1.87E+01 1.66E+02 7.38E-01 1.67E+02 3.93E-01 0 0 1.32E-01 0 1.32E-01 9.41E+00 0 9.41E+00 0 0 0 -6.57E-02 -6.57E-01 -7.23E-01 1.95E-01 -1.63E-01 3.26E-02 0 0 0 0 0 0 0 0 0 0 0 0 3.51E-03 0 3.51E-03 2.5E-01 0 2.5E-01 0 0 0 1.47E-02 0 1.47E-02 7.83E-02 0 7.83E-02 0 0 0 1.39E-02 0 1.39E-02 3.91E-01 -2.65E-01 1.26E-01 0 0 0 -7.83E+00 0 -7.83E+00 -5.85E+01 0 -5.85E+01 0 0 0 FW m3 1.08E-01 9.98E-04 1.4E-05 0 2.65E-05 5E-05 2.22E-04 -4.36E-02 PERE = Use of renewable primary energy excluding renewable primary energy resources used as raw materials; PERM = Use of renewable primary energy resources used as raw materials; PERT = Total use of renewable primary energy resources; PENRE = Use of non-renewable primary energy excluding non-renewable primary energy resources used as raw materials; PENRM = Use of non-renewable primary energy resources used as raw materials; PENRT = Total use of non-renewable primary energy resources; SM = Use of secondary material; RSF = Use of renewable secondary fuels; NRSF = Use of non-renewable secondary fuels; FW = Use of net fresh water RESULTS OF THE LCA – WASTE CATEGORIES AND OUTPUT FLOWS according to EN 15804+A2: … kg kg kg kg kg kg MJ 2.67E-03 4.44E+00 6.2E-04 0 1.94E-01 0 0 2.46E-05 4.95E-01 1.36E-04 0 0 0 0 1E-07 1.89E-03 4.54E-07 0 8.09E-02 0 9.2E-03 0 0 0 0 0 0 0 6.52E-07 1.31E-02 3.61E-06 0 0 0 0 2.75E-08 2.92E-04 1.04E-06 0 5.48E-01 0 0 C4 D 2.09E-07 3.66E-01 1.65E-06 0 0 0 1.12E-02 8.55E-04 -1.59E+00 -1.8E-04 0 0 0 0 Environmental Product Declaration - ARGE – The European Federation of Locks and Building Hardware Manufacturers - Sliding door hardware EET MJ 0 0 6.09E-02 0 0 0 7.43E-02 0 HWD = Hazardous waste disposed; NHWD = Non-hazardous waste disposed; RWD = Radioactive waste disposed; CRU = Components for re-use; MFR = Materials for recycling; MER = Materials for energy recovery; EEE = Exported electrical energy; EET = Exported thermal energy RESULTS OF THE LCA – additional impact categories according to EN 15804+A2-optional: … kg of sliding door gear Parameter Unit A1-A3 A4 A5 C1 C2 PM IR ETP-fw HTP-c HTP-nc SQP Disease incidence kBq U235 eq CTUe CTUh CTUh SQP C3 C4 D 1.37E-06 4.99E-08 1.76E-10 0 1.32E-09 5.04E-11 1.15E-09 -5.51E-07 2.84E-01 4.46E+02 2.24E-08 4.34E-07 4.12E+01 4.09E-02 7.39E+00 2.38E-10 7.46E-09 6.56E+00 1.37E-04 2.74E-02 1.33E-12 4.68E-11 2.2E-02 0 0 0 0 0 1.08E-03 1.96E-01 6.3E-12 1.98E-10 1.74E-01 7.07E-04 3.9E-02 1.04E-12 3.39E-11 1.19E-02 6.78E-04 1.39E+02 1.6E-11 2.47E-10 2.24E-01 -6.74E-02 -1.38E+02 -7.37E-09 -1.24E-07 -8.95E+00 PM = Potential incidence of disease due to PM emissions; IR = Potential Human exposure efficiency relative to U235; ETP-fw = Potential comparative Toxic Unit for ecosystems; HTP-c = Potential comparative Toxic Unit for humans (cancerogenic); HTP-nc = Potential comparative Toxic Unit for humans (not cancerogenic); SQP = Potential soil quality index Disclaimer … , the tabulated range of relative weight per material ensures that the variability of results stays within +/- 40% of the declared values (assessed for the indicators GWP, PENRT, and non-hazardous waste). 7. Requisite evidence No testing results are required by the PCR part B. 8. References Product category rules of IBU IBU (2021) IBU (2021): General Instructions for the EPD Programme of the Institut Bauen und Umwelt e.V. (General Instructions for the IBU EPD Programme). Version 2.0, Institut Bauen und Umwelt, Berlin. IBU (2021) IBU (2021): PCR Part A: Calculation rules for the life cycle assessment and requirements on the project report according to EN 15804+A2. Version … 10117 Berlin Germany +49 (0)30 3087748- 0 info@ibu-epd.com www.ibu-epd.com Programme holder Institut Bauen und Umwelt e.V. Hegelplatz … 10117 Berlin Germany +49 (0)30 3087748- 0 info@ibu-epd.com www.ibu-epd.com Author of the Life Cycle Assessment Dr. Frank Werner - Umwelt & Entwicklung Kammelenbergstrasse 30 9011 St. Gallen Switzerland + 41 (0)44 241 39 06 frank@frankwerner.ch http://www.frankwerner.ch/ Owner of the Declaration ARGE – The European Federation of Locks and Building Hardware Manufacturers Offerstraße 12 42551 Velbert Germany … +49 (0)2051 9506 15 mail@arge.org www.arge.org Environmental Product Declaration - ARGE – The European Federation of Locks and Building Hardware Manufacturers - Sliding door hardware
… 63,5 a/2 353 a … a/2 Ø12 526,5 63,5 E 170/2 - 2400 (32,5) … (32,5) 11,5 11,5 63,5 20 20 1573 … 63,5 1600 273,5 (32,5) … 273,5 436,5 Ø12 63,5 85 35 20 176,5 20 … GEZE GmbH Reinhold-Vöster-Strasse 21–29 71229 Leonberg Germany Tel.: 0049 7152 203-0 Fax: 0049 7152 203-310 www.geze.com s